Skip to content

Inventory Clearance Sale Going On Now Shop Now

Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
C4 Fabrication

Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+

SKU: 1400-3222-NB
$1,844.00
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+
Tundra Hybrid Series Front Bumper / 3rd Gen / 2022+

  • The 2022+ Tundra Overland Front Bumper

      • RETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.
      • NOTE:B parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position.B If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.
      • Bumper is designed to fit 40b3 single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.
      • Designed to fit two pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.
      • Bumper will fit LP9s on all options except the low bar, but will not come pre-drilled
      • Bumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)
      • Bumper has holes to reattach factory fender liners
      • Comes with front skid plate that replaces the factory plastic skid plate
      • Bumper is made from 3/16b3 laser cut P&O steel with 1/4b3 thick mounting plates and 1/4b3 thick winch plate.
      • 3/4b3 thick D-Ring tabs standard on every bumper and come fully welded front and back.
      • Bull bar tubing is .120 wall 1 3/4b3 and 1 1/2" diameter HREW tubing
      • Fits most winches 8k-12k in size
      • Does not fit Smitty XRC 12k winch
      • We recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.
      • Weighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w/gussets)
      • SHIPS BARE STEEL, powder coat finish not available. Product will need to be painted or powder coated before installation to prevent rusting.

  • The 2022+ Tundra Overland Front Bumper

      • RETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.
      • NOTE:B parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position.B If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.
      • Bumper is designed to fit 40b3 single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.
      • Designed to fit two pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.
      • Bumper will fit LP9s on all options except the low bar, but will not come pre-drilled
      • Bumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)
      • Bumper has holes to reattach factory fender liners
      • Comes with front skid plate that replaces the factory plastic skid plate
      • Bumper is made from 3/16b3 laser cut P&O steel with 1/4b3 thick mounting plates and 1/4b3 thick winch plate.
      • 3/4b3 thick D-Ring tabs standard on every bumper and come fully welded front and back.
      • Bull bar tubing is .120 wall 1 3/4b3 and 1 1/2" diameter HREW tubing
      • Fits most winches 8k-12k in size
      • Does not fit Smitty XRC 12k winch
      • We recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.
      • Weighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w/gussets)
      • SHIPS BARE STEEL, powder coat finish not available. Product will need to be painted or powder coated before installation to prevent rusting.

FAQs

Looking for your dream build?

Contact Us

My Cart

View Cart
You are $0.00 away from free shipping Congratulations, you've got free shipping!

Cart is empty