The BP51 suspension kits are here for the Toyota Tacoma. BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance for your 4x4.
Although there are subtle differences between the last generation Tacoma and the new generation, with the adjustable nature of the BP-51 the OME engineers have been able to tune and design the BP-51 package to suit both applications. This package consists of 2 front coil-overs, 2 rear shock absorbers and 2 fit kits.
The front coil-overs have been tuned in both length and feel specifically to the Tacoma and are capable of accommodating setups with and without accessories (bumpers, winch, etc). Specific reservoir brackets have been designed for application specific reservoir placement and also relocation of the sway bar to allow clearance at the spring seat. While the front coil-overs are adjustable in height, the system has been designed for a 2 inch (50mm) ride height increase and a minimum of 2 inch (50 mm) down travel.
An extensive development and tuning project was undertaken to correctly match the ride quality to the spring rate and resulted in 2 front strut options depending on spring selection.
As the suspension design is the same as the previous model Tacoma, existing coil part numbers could be used, noting some slight change in application. Factory geometry allowed for a 2-inch lift and while still maintain an adequate level of droop.
Great emphasis was placed on ride comfort, with and without a payload, which led to three loading scenarios using the same leaf spring part number (CS047R). For stock loads where no weight is added, it is recommended to remove a leaf from the spring pack to maximize ride comfort and achieving a 2 inch ride height increase. For heavy applications an extra leaf has been designed.
A spring bush kit has been developed to work with the original shackles and the driveline spacer kit is available should the vehicle experience any driveline vibration.
This Toyota Tacoma BP51 kit is the complete suspension package. Please call us if you'd like to order individual components instead.
ARB Part # OMETAC16BP51B INCLUDES:
TACOMA BP-51 KIT $3173.00 $3340.00
COILOVER: TACOMA FR LH BP5190006L 2
COILOVER: TACOMA FR LR BP5190006R 2
BP FIT KIT TACOMA FRONT VM80010016 2
SPRING TOY TACOMA 05+ LEAF CS047R 2
SHOCK: TACOMA REAR LH BP5160011L 1
SHOCK: TACOMA REAR RH BP5160011R 4
TACOMA REAR D-SHAFT SPACER FK29 2
UBOLTS OMEU53A 1
SPRING BUSHING KIT OMESB108 2
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD.